1.인천공항 라운지
먹을 것이 많다고 평이 좋다던 마티나 라운지를 갔으나..

뭔가 오래된 느낌. 그리고 맥주랑 와인 두 종류 밖에 없다는 점에서 10점 만점에 5점 준다.

2.비행 10시간
한국시간 토요일 오후 4시반 비행기로 San Fransisco 현지시간 11시쯤 도착.
주간지 두 권 봤는데 포스팅 아이디어랑 소재가 샘솟듯이 올라왔다. 하나 골라서 구독해야지.


영화도 두편 섭렵하고..
나는 사랑과 시간과 죽음을 만났다.
The Great wall

3. San Fransisco공항도착
오늘 관광의 메인 이동수단 렌터카를 빌렸는데 소나타다 ㅋㅋ
이 공항에는 별도로 렌터카 업체들이 모인 곳이 있었다. 일요일이라 오픈한 곳이 몇 개 되지 않았는데 그중 젤 싼 업체 Budget.
인터넷에는 90불 정도로 나오던데 보험이랑 기타 차지 포함하니 덕지덕지 잡가격이 붙어서 136불. 놀라운 것은 한국 면허증만 있어도 운전이 가능하다고 했다. 인터넷에서 찾은 정보로는 국제운전면허증을 발급받아야 한다고 봤는데 아니구나.

4. 슈퍼디퍼버거
지친 몸을 이끌고 운전수 한명 정해서 일단 유니온스퀘어 슈퍼디퍼버거를 먹으러 고고.
그런데... 가는길에 왠 무지개가 한가득 그리고 요상한 옷을 입은...게이들이...ㅋㅋ
퀴어 페스티벌이라고 한다. 성소수자들의 가두행진이 허락된 날.

길거리 가게에 온통 무지개 깃발이 휘날리는 와중에 무지개 팬티 남성 등장하자 들리는 환호소리. 우오오오~
와도 왜 이런 날에 와서...ㅋㅋㅋㅋ 좋은 구경 헸네 ㅋㅋㅋ.


버거가 참 쫀득 한 것이 고기가 찰지고 ㅠㅠ 버터향과 마늘향의 조화 그리고 아보카도의 고소함이 입안에서 향긋 사르르르...............


5. 금문교 Golden Gate Bridge
서울에 수많은 다리들이랑 크게 다르거나 감동받은 건 없었다. 그냥 현수교구나 정도?

구조 엔지니어로서 눈에 들어왔던 버클링 실험재
약축버클링은 박스구조로 하던가 좌우플랜지에 날개를더 내리지.. 왜 x형상을 만들었을까? 어차피 강축에서 받아줄텐데..

이와중에 자랑스런 한국산 발전기 발견..ㅋㅋ

6. 팰리스오브 파인아츠
건물이 예쁘다고 사진찍으러 가고 싶다고 들른 곳. 웨딩촬영 두 팀. 연인팀들 수두룩. 여유있는 분위기가 참 좋았다.
근데 여긴 저녁시간 주차장을 조심해야 할 듯? 깨진유리가 10자리 정도는 도ㅑ 보였다많은 걸 봐선 유리깨고 차를 털어가는 것 같았다.


7. 피어39 바다사자
퍼블릭파킹건물이 길 건너에 있었는데 시간당 12달러 ㅋㅋ
추웠다. 해가 지고 바람만 불자 온도가 뚝 떨어졌다. 10도중반 추정. 마치 한국의 가을날씨 같다고 할까? 반팔 입고 다니던 일행이 기념품가게에서 24달러짜리 후디를 사 입고 행복해 하는걸 보면 정말 춥긴 추웠나보다.
부두 서편바다 끝 나무뗏목위에 바다사자들이 누워 자고있었는데 갈매기가 옆에서 쫑알거려도 신경 안쓰고 자는 모습이 평화로워 보였다. 배고프면 잡아먹겠지? ㅎㅎ


8. 기라델리스퀘어 맥코믹쉬림 그리고 기라델리초컬릿
맥코믹에선 플레이트 하나당 3~4 만원대. 전망좋은빕스같은 느낌.


8. 마트
믹스된 칵테일인줄 알고

맥주 사고 있던 친구에게
캘리포니아 로컬비어가 뭐냐고 물었더니 anchor brewery!라며 craft pack을 추천했다.
자기 인스타 통해서 연락하라고 주소를 주길래 들어가보니 아티스트 ㅋㅋ


8. 호텔복귀
San Fransisco Hyatt airport
ISOPE가 이 안에서 열려서 여기를 잡아준 것 같은데
창문이 안 열리는 곳은 처음이다.마치 감옥 같았다.
그리고 구식 11자 플러그. 읔.
공항 옆에 있다는 건 장점이자 단점


치명적인건 학과삼실 여직원이 우리 네명한테 방 하나만 잡아준 것.
직원들이 물었다. 진짜 네명 잘거냐곸ㅋㅋㅋㅋㅋㅋ


내일부터 학회가 시작된다.
두근두근.

학교 모 프로그램에서 펀딩을 주신 덕분에 ISOPE (국제 해양극지공학회) 에 참석할 수 있게 되었다.


연구주제 관련 최신 트렌트를 한눈에 볼 수 있겠지?




#ISOPE 홈페이지에 올라온 이번 년도 Conference 정보


 ISOPE Conferences, Symposia and Workshops 

 

The Annual International Offshore and Polar Engineering Conference (ISOPE)

The Annual International Ocean and Polar Engineering Conference (ISOPE)


Since the annual ISOPE-92 San Francisco, the annual ISOPE Conferences have been held with the world's largest technical program of its kind with peer-reviewed papers (average 320-510 papers). 

Since ISOPE-2002 Kyushu, ISOPE-2007 Lisbon, ISOPE-2010 Beijing, and ISOPE-2015 Kona Hawaii continuously broke the attendance record of the previous ISOPE conference: ISOPE has held the technical program of 148-188 opening and technical sessions with 650-950 peer-reviewed papers from 49-54 countries in the Conference Proceedings.

Conference papers are indexed to Web of Science, SCOPUS, Engineering Index, Compendex, Chemical Abstracts and more.

 

The Twenty-seventh (2017) International Ocean and Polar Engineering Conference, 

San Francisco, California, June 25−30, 2017




#관심 Session List


(업뎃중)



#관심 관광 List


실리콘밸리-테슬라,나사,구글,페북
탑스쿨-스탠포드, UC버클리
fishing?

(업뎃중)




#출발 전 체크리스트


ESTA 미국비자 사본 (직접 신청 할 수 있는데, 수수료 챙기려는 유사 사이트 정말 많음, US관세청 공홈 에서 받아야 함)

여권사본,

$300 캐쉬 + 현금카드

백팩에 봄날씨 옷들 세벌






ABAQUS 에서 지금 구현 하려고 하는 대상은 용접 구조물의 파괴역학 검증이다.

  1. Welding analysis 를 통한 residual stress 확인 후
  2. Fracture mechanics analysis 를 통한 Fracture 여부 확인,
  3. 좀 더 욕심내자면 Crack 이 일어나는 하중 및 경향 확인


다쏘 시스템 담당자와 통화를 해보니, 홈페이지에 이러닝 자료를 제공하는 공간이 있다고 한다.

  1. SIMULIA Learning Community 에 들어가서,
  2. eSeminars 선택,
  3. ABAQUS 선택하면,

현재 볼 수 있는 eSeminar가 나온다.



New e-Seminar recording:
Spot Weld Modeling and Optimization
Date posted: March 2017
https://swym.3ds.com/#post:42451


Enhanced Abaqus Welding Interface
Date posted: January 2017
https://swym.3ds.com/#post:42373


Particle Methods in Abaqus: 
DEM vs. SPH
Date posted: January 2017
https://swym.3ds.com/#post:42319


Concept to Production Using Simulation Insight for Additive Manufacturing
Date posted: January 2017
https://swym.3ds.com/#post:42241


The Latest Releases of Abaqus, 
fe-safe, Tosca and Isight Now Available
December 2016
https://swym.3ds.com/#post:42209


Customer Spotlight 2: 
Development of Self-Regulating Variable-Geometry Radiators with SIMULIA
October 2016
https://swym.3ds.com/#post:41851


Simultaneous and Integrated Calibration of 
Hyperelastic-Viscoelastic Materials: 
September 2016
https://swym.3ds.com/#post:41518


Overlooked Functionality in Abaqus: 
September 2016
https://swym.3ds.com/#post:41693


Design and Calibrate Materials for Additive Manufacturing Processes: August 2016
https://swym.3ds.com/#post:41446


The Journey from Validate to Innovate – harnessing SIMULIA’s Power of the Portfolio
Date posted: August 2016
https://swym.3ds.com/#post:41470


Virtual Modeling's Role in Improving Impact Performance of Plastic Containers
Date posted: July 2016
https://swym.3ds.com/#post:41298


Power of SIMULIA Portfolio 5: Using Checklists for Building Robust Abaqus Models
Date posted: June 2016
https://swym.3ds.com/#post:41123


Break out of the Silo: 
Co-simulation with SIMULIA Abaqus
Date posted: June 2016
https://swym.3ds.com/#post:41070 


Reduce Cost and Improve Designs using Optimization for Additive Manufacturing Applications
Date posted: April 2016
https://swym.3ds.com/#post:40874


Tire-Soil eSeminar - background information
Date posted: April 2016
https://swym.3ds.com/#post:40783


Power of SIMULIA Portfolio 2: Increasing the Value of your SIMULIA Tokens
Date posted: February 2016
https://swym.3ds.com/#post:40550


From Solve to Innovate: Use the Power of the Portfolio within your CAE environment
Date posted: January 2016
https://swym.3ds.com/#post:40233


Using Simulation to Accelerate the Adoption of Additive Manufacturing
Date posted: December 2015 
https://swym.3ds.com/#post:39886

New Release of Abaqus & fe-safe
Date posted: December 2015 
https://swym.3ds.com/#post:39854


Structural-Electromagnetic Co-design eSeminar Replay
Date posted: December 2015
https://swym.3ds.com/#post:39791


Introduction to Finite Element Analysis with Abaqus
Date posted: December 2015
https://swym.3ds.com/#post:39761


Enhance your Productivity by Using Abaqus Scripting
Date posted: November 2015 
https://swym.3ds.com/#post:39544



From Solve to Innovate Use the Power of the Portfolio
Date posted: September 2015
https://swym.3ds.com/#post:38891


Update your Knowledge of Contact in Abaqus/Standard
Date posted: September 2015
https://swym.3ds.com/#post:38796


Composites Modeling with Abaqus
Date posted: July 2015
https://swym.3ds.com/#post:38193


Overview of Heat transfer and Thermal Stress Analysis 
Date posted: May 2015
https://swym.3ds.com/#post:37225


Essential User Subroutines for Abaqus
Date posted: April 2015 
https://swym.3ds.com/#post:36510


Modeling Plastics and Polymers: Tips, Tools and Techniques
Date posted: January 2015 
https://swym.3ds.com/#post:35322


Explore Abaqus/Explicit Techniques
Date posted: October 2014 
https://swym.3ds.com/#post:33455


Linear Dynamic Secrets You Need to Know
Date posted: August 2014 
https://swym.3ds.com/#post:32487


Modeling Extreme Deformation and Fluid Flow Using Abaqus
Date posted: June 2014 
https://swym.3ds.com/#post:31623


Using XFEM in Abaqus to model fracture and crack propagation- January e-Seminar recap and video recording
Date posted: March 2014 
https://swym.3ds.com/#post:29549


Webinar Recap Multiphysics Parts 2 & 3: Abaqus/CFD, Native FSI and CEL
Date posted: November 2013 
https://swym.3ds.com/#post:26117


Webinar Recap: SIMULIA Multiphysics - Part 1: Mulitphysics in Abaqus
Date posted: August 2013 
https://swym.3ds.com/#post:23130


Contact Updates in Abaqus 6.13 Webinar Recording
Date posted: August 2013 
https://swym.3ds.com/#post:23015


Webinar Recap: Element Selection in Abaqus
Date posted: July 2013 
https://swym.3ds.com/#post:21806


SIMULIA Central ATOM Webinar Recap
Date posted: July 2012 
https://swym.3ds.com/#post:12592


Kontakt in Abaqus/Standard + Tipps und Tricks e-Seminar (German)
Date posted: April 2015 
https://swym.3ds.com/#post:36848


German e-Seminar Recording: Verwendung von XFEM in Abaqus zur Rissfortschrittsberechnung (German)
Date posted: February 2015 
https://swym.3ds.com/#post:35786


German e-Seminar Recording: Update to Abaqus 6.14
Date posted: September 2014 
https://swym.3ds.com/#post:32796


German e-Seminar Recording: Vernetzungsstrategien/Meshing Strategies in Abaqus/CAE (German)
Date posted: May 2014 
https://swym.3ds.com/#post:30754


German e-Seminar Recording: Geometry Handling in Abaqus/CAE (German)
Date posted: April 2014 
https://swym.3ds.com/#post:30424


Solve Challenging Contact Problems with Abaqus
http://media.3ds.com/support/simulia/

 



이 중에서 내가 필요한 세미나는,


Enhanced Abaqus Welding Interface eSeminar – Replay and Additional Information


XFEM Analysis of a Plate with an Edge Crack



일단 두 개부터 리뷰해야겠다.





*


지금


보고 계신


블로그 페이지는, 


인터넷글 불펌이 없는


"고오품질 수제 블로오그"


더 나은 글의 동기부여를 위해


구글애드센스 같은 CPC는 있지만


댓가받는 리뷰는 절대 하지 않습니다.


이 페이지를 보고 "이마 탁!" 치신 분들은,


공감버튼 꾸욱! 혹은 댓글로 응원 부탁 드리고~


오늘도 행복하고 즐거운 하루 되시길 응원 합니다 :)


ABAQUS라는 프로그램을 접하게 되면서 구글에서 자료를 찾다 보면 6.* 버젼용 자료라는 꼬릿말이 따라온다.

버젼 별로 뭔가 의미가 있을 것 같아서 둘러보니 위키피디아에 있는 표를 찾았다.

Abaqus versionRelease date
5.41994?
... ?
6.1 ?
6.2 ?
6.32002
6.42003
6.52005
6.62006
6.72007
6.82008
6.92009
6.102010
6.112011
6.122012
6.132013
6.142014
20162015
20172016

2천년대 들어오면서 6.*를 사용했고 거의 소숫점 자리가 년도와 유사하다고 이해하면 된다.

그리고 2016년도부터 년도를 버젼으로 사용하기 시작했다.


구글링에서 나오는 ABAQUS 자료의 버젼은 이제 언제 나온 건지 알 수 있겠다.




하지만 엔지니어링 회사에서 실제로 사용하는 해석 프로그램은 구 버젼이다.

매년 새로 나오는 프로그램에 대한 보안패치 대응도 어려울 뿐더러,

기존에 개발 해 놓은 in house 프로그램을 프로그램 주기와 같이 업데이트 하지 않는다.

또한 실적자료가 신 버젼에서 오류를 내는 경우도 많다.

그래서 사용자가 위험을 감수하면서 까지 최신버젼을 사용하지 않는다.


그러나 학교에서 사용하는 프로그램은 최신 버젼을 사용한다.

학문적으로 최신 정보에 항상 목말라 있어서 해석 테크닉 적으로나 내부 알고리즘 해석기능 속도 등 매년 발전하는 프로그램의 최신 기능을 최대한 수용하는 자세인 것 같다.


적어도 내가 경험한 조직과 주변 조직들에서 그렇더라.





-끝-

#. Why?

  • 유학에 대한 로망은 항상 가지고 있었고,
  • 영국 발음에 대한 로망과,
  • 글로벌 인덱스 no.1 도시 런던에 대한 로망 (날씨빼고)
  • 그리고 연구직에 대한 로망이 겹치면서

영국 박사 유학이 가고 싶어졌습니다.


그리고 하나 더하자면, 


아름답고 창의적인 초고층 건물, Skyscrapper 설계가 하고 싶습니다.


지금 석사 논문도 잘 안되고 있지만 그건 논 외로 하겠습니다..;;




#. 정보 수집은 여기서 하고 있습니다. (추가중)


A. 커뮤니티

A1. 해커스 영국유학 Q&A

A2. 하이브레인 해외유학상담실에서 "영국" 검색 

A3. 대학원생 때 알았더라면 좋았을 것들 (통찰력 있는 글이 많음. 전공바꾸기 포함)


B. 유학원, 기관 

B1. British Council 인증 영국전문 유학원 리스트

B2. 리더스유학 영국대학원

B2. Study UK (British Council에서 운영하는 영국대학 가이드, 중요)


C. 학교, 과 검색

C1. Top Universities in the World 2018

C2. UCAS (Universities & Colleges Admissions Service) 영국대학 입학 지원 총괄기관 (영국유학닷컴에 UCAS정리글 참조, 학부지원용 총괄이라는데, Study UK에서 코스검색으로 링크 달려있음)

C3. Prospect (UK postgraduate course 검색, UCAS보다 검색퀄리티 낮은듯)

C4. Cambridge Graduate Admissions PhD in Engineering


D. 장학금

D1. Study-UK - Scholarships and financial support

D2. Chevening


E. 초고층 건물

E1. skyscrapercenter.com

E2. Council on Tall Buildings and Urban Habitat - Architectural




#. 요약 해 보면 이렇습니다.

1) 입결: 기본 셋팅은 있으나 절대적이지 않고, 교수의 재량에 따라 판단 가능

2) 학비: 장학금 받는 분 일부 있으나 안된다고 알고 계시는분들 많음

3) 기간: 3년~4년 정도 전공에 따라 고무줄

4) 영어: 탑스쿨의 경우 기본 IELTS 7.0이 필요한 듯? (Requirement에 Must라고 되어있는데 왜 유도리 있다고 할까?)




#. 전체적인 지원 흐름은 대략 이렇게 됩니다. (Education UK; How to apply)

1) Select Universities and Courses

2) Select Professor

3) Prepare Resume

4) Prepare Research Proposal & IELTS (*IELTS 최소기준이 절대적이지 않음)

5) Contact to Professors by Emails

6) Process Applications

7) Accept an offer

8) Arrange Funding (*입학허가와 별개)

9) Apply for a Visa

10 Fly to UK


10단계로 적어 놓으니 간단해 보이는데 항목별로 보면 결코 각 과정이 쉽지 않겠네요.


특이한 점은,


(4번*) IELTS 최소 점수가 절대적이지 않고 교수 재량으로 커버 가능하다는 것.

> 일단 컨텍이 중요한 듯


(8번*) 펀딩이 입학 허가에 포함 되어 있지 않다는 것.

> 영국 경험과 본토발음?이 학비1억과 바꿀 만한 가치가 있는가?




계속 알아보고 업데이트 예정 입니다.

이라고 하면 미루겠지? ㅋㅋ


-끝-



#20190906금 추가


석사과정에 전공/연구한 분야로 갈 것인가,

하고싶은 분야로 갈 것인가.

고민하는 것 보다


펀딩이 나오는 포지션 자체가 없다는 것,

그리고 가끔 나오는 펀딩포지션은 중하위권 대학들 -_-;;

하...

영국 펀딩박사는 쉽지 않구나.


사진을 링크만 걸어서 올릴 수 없을까 고민을 하다,

"티스토리 사진 링크 업로드"

이런 키워드로 검색을 해 봤는데 안뜬다 ㅠ


애드센스 단톡방에 질문을 했더니

그런 기능을 구현한 자바 스크립트를 올리신 분의 블로그 를 알려 주시네 ㅋ




이런 식으로 이미지 태그를 엮어 놓은 듯 하다.


바로가기 하신 분들이 많던데,

이런 기능을 구현 할 수 있다면 

바로가기 검색유입 엄청 뜰듯 ㅋㅋㅋ




*


지금


보고 계신


블로그 페이지는, 


인터넷글 불펌이 없는


"고오품질 수제 블로오그"


더 나은 글의 동기부여를 위해


구글애드센스는 있을 수도 있지만


댓가받는 리뷰는 절대 하지 않습니다.


이 페이지를 보고 "이마 탁!" 치신 분들은,


공감버튼 꾸욱! 혹은 댓글로 응원 부탁 드리고~


오늘도 행복하고 즐거운 하루 되시길 응원 합니다 :)





Lesson 1.0: Understanding CPC and CPM


1. 요약


CPM : Cost Per 1000 iMpressions

천 번 클릭 할 때 주는 비용.


RPM : Revenue Per 1000 iMpression

천 번 클릭 할 때의 수익.

구글 애드센스에서만 있는 개념.


CPC : Cost Per Click

클릭할 때 마다의 비용.


위 세 가지가 기본 광고 개념이고 아래 두 가지는 떠오르는 신상이라고 합니다.


CPE : Cost Per Engagement

클릭 후 뭔가의 액션을 할 때.


Active View CPM : 1000 viewable impression

유효 클릭에 대해서만 지급하는 것을 의미하는 것 같습니다.





2. 아래 영상 및 스크립트



0:00Welcome to Unit 1: Understanding CPC

0:03and CPM. The world of online advertising is filled with acronyms.

0:08CPC, CPM, RPM... the list goes on.

0:12While these acronyms represent important metrics, it can be hard to know where to start

0:17when it comes to increasing these values and, ultimately, increasing your revenue.

0:21It's also the case that many of the common acronyms used in the online advertising industry

0:26can sometimes mean different things depending on the context and the usage,

0:30which can be really confusing. Let's walk through the most important ones right now,

0:35starting with CPM. CPM stands for cost per 1000 impressions.

0:40From the advertiser's perspective, CPM refers to the price

0:44they're willing to pay to serve one thousand impressions of their ad.

0:47So in the AdSense auction if an advertiser bids

0:51a CPM of two dollars, this means he or she is willing to pay

0:54two dollars for every thousand times the ad appears to a user.

0:58You may have noticed that there are no CPM values in your AdSense reporting.

1:02In AdSense performance reports, we use the acronym

1:06RPM, which stands for revenue per 1000 impressions.

1:10Since ads are not displayed in even bundles of one thousand impressions

1:14all impressions served on your site, regardless of the bid type,

1:18are combined and averaged in your reporting to show your affective revenue

1:22per 1000 impressions, or RPM.

1:24To recap, RPM is an AdSense-only term used to report your impression-based revenue.

1:30CPM is an industry-wide term

1:33that refers to impression-based bids from advertisers.

1:36The next acronym to know is CPC.

1:39CPC stands for cost-per-click. The cost-per-click

1:44is the price an advertiser pays each time a user clicks on an ad.

1:48In your reporting, CPC metrics show the revenue you receive

1:52each time a user clicks on an ad on your site. There are also two new bid types

1:57that will become increasingly popular down the road.

2:00The first is CPE or cost per engagement.

2:04With engagement ads, the advertiser pays only when a user interacts with the ad

2:09in a particular way beyond just clicking on it. These ads are largely video

2:13and rich media ads. The other new bidding metric

2:17is active view CPM. With active view CPM bidding,

2:21advertisers bid on one thousand viewable impressions

2:24and only pay for impressions that are measured as viewable.

2:27That is when at least 50 percent of the ad is displayed on screen

2:31for at least one second. As these new bidding types become more common,

2:35we will continue to provide more information on them,

2:38including in your AdSense reporting.

2:40In this unit, we'll focus on the changes you can make

2:44to your ad set-up to attract higher-paying ads from advertisers.

2:48We will cover the various settings for your ads and your AdSense account

2:52that could have had direct impact on your ad unit CPM and CPC.




이상 마치겠습니다.

행복한 하루 보내시길 바랍니다.


+ Recent posts